Properites* |
Test Method | Units | 1198 |
1199 |
2000 |
2002 |
2004 |
2006 |
2016 |
2019 |
2044 |
PHYSICAL |
|||||||||||
Grab Tensile Strength |
ASTM D-4632 |
lb | 300/200 | 370/250 | 140 | 200 | 250 | 315 | 315 | 350/250 | 600/500 |
Grab Tensile Elongation |
ASTM D-4632 | % | 15 | 15 | 15 | 15 | 15 | 15 | 15 | 15 | 15 |
Wide Width Tensile |
ASTM D-4595 | lb/ft | n/a | n/a | n/a | n/a | n/a | 2100 | 2400 | n/a | 4800 |
Wide Width Elongation |
ASTM D-4595 | % | n/a | n/a | n/a | n/a | n/a | 25/8 | 15/8 | n/a | 10/8 |
Mullen Burst |
ASTM D-4595 | psi | 450 | 480 | 325 | 400 | 500 | 600 | 800 | 510 | 1350 |
Puncture |
ASTM D-3786 | lb | 120 | 135 | 65 | 90 | 100 | 120 | 120 | 140 | 170 |
Trapezoid Tear |
ASTM D-4833 | lb | 65 | 100/60 | 45 | 75 | 90 | 120 | 120 | 95 | 250 |
UV Resistance** |
ASTM D-4533 | %** | 90 | 90 | 70 | 70 | 70 | 70 | 80 | 90 | 80 |
HYDRAULIC |
|||||||||||
Apparent Opening Size (AOS) |
ASTM D-4751 | us sieve | 40 | 70 | 30 | 50 | 40 | 40 | 40 | 70 | 30 |
Permittivity |
ASTM D-4491 | sec-1 | 0.5 | 0.28 | 0.05 | 0.05 | 0.05 | 0.55 | 0.70 | 0.28 | 0.15 |
Flow Rate |
ASTM D-4491 | gal/min/ft2 | 35 | 18 | 4 | 4 | 4 | 4 | 50 | 18 | 10 |
PACKAGING |
|||||||||||
Roll Width |
ft | 6.25/12 | 6/12 | 12.5/18 | 12.5/14/18 | 12.5/18 | 12.5/18 | 15 | 15 | 12.5/15/18 | |
Roll Length |
ft | 634/330 | 450/225 | 504/350 | 504/450/351 | 12.5/18 | 12.5/18 | 300 | 300 | 216/180/150 | |
Area |
yd2 | 440 | 3000 | 700 | 700 | 500/504 | 500/504 | 500 | 500 | 300 | |